精彩推荐

等离子切割机 Plasma cutting machine

2019/8/14

铝板等离子切割机

应用范围:
适用铁板、铝板、镀锌板、白钢板、钛金板等金属板材
性能特点:
     1、横梁采用轻型结构设计,该结构具有刚性好,自重轻,运动惯量小等特点。 
2、龙门式结构,Y轴采用同步双电机双驱动以及X.Y.Z三轴采用双直线导轨,传动平稳,运行精度高。 
3、针对广告立体发光字、槽形字的金属面板及底板进行切割,切割精度达到优良指标。如果配备美国海宝等离子电源可达到激光切割机下限。 
4、与其它广告设备(吸塑机、剪齿机、雕刻机)配套,形成广告字加工工艺的流水线,彻底解决传统手工加工方式。工作效率提高几十倍。 
5、切割口小,整齐,无掉渣现象,避免了二次修整加工。 
6、适用铁板、铝板、镀锌板、白钢板、钛金板等金属板材。 
7、切割速度快,精度高且成本低。 
8、数控系统配置高,自动引弧,性能稳定。 
   9、支持文泰,北航海尔,ARTCAM,Type3等软件生成的标准G代码路径文件,也可以通过软件转换读取AUTOCAD等软件生成的DXF格式文件。控制系统采用U盘交换加工文件,操作方便快捷。 
   10,机器台面,踩用了加厚的的条子,火焰喷射器,和台面厂家设置在20mm之外,所以不会伤害到台面。 
型号参数:

加工面积:1300x2500 mm 
Z轴      自动调高系统 
加工厚度:0.1-15mm 
切割速度:0-8000mm/min 
整机功率:8.5kw 
输入电压:380V 
电源频率:50hz 
等离子电流:60A 

工作方式:非接触式引弧,维宏控制系统




Aluminum plate plasma cutting machine
Application range:
Suitable for metal plates such as iron plate, aluminum plate, galvanized plate, white steel plate and titanium plate

Performance characteristics:
1. The beam is designed with light structure. The structure has the characteristics of good rigidity, light weight and small motion inertia.
2. The gantry structure, the Y-axis adopts the synchronous double-motor double drive and the X.Y.Z three-axis adopts the double linear guide rail, the transmission is stable and the running precision is high.
3. For the cutting of the metal panel and the bottom plate of the three-dimensional luminous characters and the grooved characters, the cutting precision reaches an excellent index. If equipped with the US Hypertherm plasma power supply, the lower limit of the laser cutting machine can be achieved.
4. It is matched with other advertising equipment (blister machine, gear cutting machine, engraving machine) to form the assembly line of advertising word processing technology, completely solving the traditional manual processing method. Work efficiency has increased by several times.
5, the cutting mouth is small, tidy, no slag phenomenon, to avoid secondary dressing processing.
6. Applicable to metal plates such as iron plate, aluminum plate, galvanized plate, white steel plate and titanium plate.
7, cutting speed, high precision and low cost.
8. The numerical control system has high configuration, automatic arc striking and stable performance.
9, support Wentai, North Nautical, ARTCAM, Type3 and other software generated standard G code path file, you can also read the DXF format file generated by AUTOCAD and other software through software conversion. The control system uses U disk to exchange processing files, which is convenient and quick to operate.
10, the machine table, stepped on the thick strips, flame sprayer, and countertop manufacturers set outside 20mm, so it will not hurt the countertop.

Model parameters:
Processing area: 1300x2500 mm
Z axis automatic height adjustment system
Processing thickness: 0.1-15mm
Cutting speed: 0-8000mm/min
Machine power: 8.5kw
Input voltage: 380V
Power frequency: 50hz
Plasma current: 60A
Working mode: non-contact arc ignition, Weihong control system




 >>  1325 多头雕刻机 1325 muli-heads CNC router machine
 <<